Skip to main content
Exclusive Savings: Take 10% OFF All Cenmed Products | Upgrade Your Lab For Less Shop Now
US English

ALADDIN SCIENTIFIC

Human Neutrophil Isolation Kit (Negative Isolation) (C008B-270060)

The Human Neutrophil Isolation Kit (Negative Isolation) is used to isolate neutrophils from fresh peripheral blood by negative i solation. The principle is to use a cocktail of biotin-labeled monoclonal antibodies against non-target cells,...

Description

The Human Neutrophil Isolation Kit (Negative Isolation) is used to isolate neutrophils from fresh peripheral blood by negative i solation. The principle is to use a cocktail of biotin-labeled monoclonal antibodies against non-target cells, followed by removal of these non-target cells using streptavidin-labeled magnetic beads, thereby achieving the isolation of human neutrophils. A magnetic separator is required for the isolation process.ApplicationsIsolation of neutrophils from fresh human peripheral blood. Red blood cells must be removed prior to isolation.H1522394ComponentAppearance10T50T100TStorageH1522394ABiotin-Antibody MixLiquid20 μL100 μL200 μL2-8℃.H1522394BStreptavidin Magnetic BeadsLiquid200 μL1 mL1 mL×22-8℃.Sample PreparationLyse red blood cellsPlace fresh anticoagulated peripheral blood in a centrifuge tube, add red blood cell lysis buffer, and lyse the red blood cells.Note: The red blood cell lysis step can be adjusted in volume and time depending on the lysis buffer used. It is generally recommended to add 3–5 times the volume of red blood cell lysis buffer relative to the blood volume and perform lysis at 4°C or on ice. If lysis is incomplete, a second lysis may be performed. A small amount of residual red blood cells usually does not affect the purity of subsequent cell isolation.Filter and centrifugeAfter red blood cell lysis, resuspend the cell pellet in PBS, filter through a cell strainer, and centrifuge at 400 g for 5 min.Repeat washDiscard the supernatant, add PBS, and wash once more to thoroughly remove the lysis buffer and cell debris.Adjust cell densityAfter washing, discard the supernatant and resuspend the cells in Isolation Buffer to a density of 1×10⁸ cells/mL.Note: Isolation buffer is PBS containing 2 mM EDTA and 2% fetal bovine serum (FBS). The buffer must be pre-filtered through a 0.22 μm filter.Isolation ProtocolAdd Biotin-Antibody MixAdd 100 μL of cell suspension (using 1×10⁷ cells as an example) to the bottom of a 1.5 mL centrifuge tube, then add 2 μL of Biotin-Antibody Mix. Mix thoroughly and incubate at room temperature for 10 min.Note: When adding the cell suspension, add it to the bottom of the tube, avoiding the tube wall. If isolating more cells, increase the volume of Biotin-Antibody Mix proportionally. If isolating fewer than 1×10⁷ cells, adjust the volume to 100 μL with Isolation Buffer and still use 2 μL of Biotin-Antibody Mix.Add Streptavidin Magnetic BeadsAdd 20 μL of washed Streptavidin Magnetic Beads to the centrifuge tube (the beads must be washed before use: vortex thoroughly to resuspend the beads, transfer the required volume of beads to a 1.5 mL centrifuge tube, add 1 mL of Isolation Buffer, centrifuge at 10,000 g for 1 min or use a magnetic separator for 3 min, then discard the supernatant. Add 1 mL of Isolation Buffer, wash the beads once more, and then resuspend the beads in the same volume of Isolation Buffer as originally taken. For example, if 20 μL of beads are taken, resuspend them in 20 μL of Isolation Buffer after washing). Mix thoroughly and incubate at room temperature for 10 min.Note: If isolating more cells, increase the volume of Streptavidin Magnetic Beads proportionally. For example, to isolate 5×10⁷ cells, add 10 μL of Biotin-Antibody Mix and 100 μL of Streptavidin Magnetic Beads to 500 μL of cell suspension.Transfer and diluteAfter incubation, transfer the cell and bead mixture to a FACS tube, add Isolation Buffer to a total volume of 2.5 mL, and mix thoroughly by pipetting up and down.Magnetic separationPlace the FACS tube on a magnetic separator and let stand for 5 min to allow the beads to be captured.Collect neutrophilsGently pour the cell suspension into a sterile centrifuge tube (do not remove the FACS tube from the magnetic separator while pouring, and avoid sucking up the beads). This cell suspension contains the purified human neutrophils.Resuspend for further useWash the cells as required for your experiment, then resuspend them in the desired buffer or culture medium for subsequent molecular or cell biology experiments.Isolation PerformanceNeutrophils were isolated from human peripheral blood. Cells before and after isolation were stained with Alexa Fluor 647-labeled anti-human CD66b antibody (clone 6/40c) and FITC-labeled anti-human CD16 antibody (clone 3G8) and analyzed by flow cytometry. The purity of neutrophils before and after isolation was 58.81% and 98.08%, respectively.PrecautionsAvoid freezing the magnetic beads and antibody mix during use and storage.Low-retention pipette tips and centrifuge tubes are recommended to avoid loss of beads and antibodies due to adsorption.This product must be used with a magnetic separator.For research use only.


Specifications & Purity: The Human Neutrophil Isolation Kit (Negative Isolation) is used to isolate neutrophils from fresh peripheral blood by negative i solation. The principle is to use a cocktail of biotin-labeled monoclonal antibodies against non-target cells, followed by removal of these non-target cells using streptavidin-labeled magnetic beads, thereby achieving the isolation of human neutrophils. A magnetic separator is required for the isolation process.ApplicationsIsolation of neutrophils from fresh human peripheral blood. Red blood cells must be removed prior to isolation.H1522394ComponentAppearance10T50T100TStorageH1522394ABiotin-Antibody MixLiquid20 μL100 μL200 μL2-8℃.H1522394BStreptavidin Magnetic BeadsLiquid200 μL1 mL1 mL×22-8℃.Sample PreparationLyse red blood cellsPlace fresh anticoagulated peripheral blood in a centrifuge tube, add red blood cell lysis buffer, and lyse the red blood cells.Note: The red blood cell lysis step can be adjusted in volume and time depending on the lysis buffer used. It is generally recommended to add 3–5 times the volume of red blood cell lysis buffer relative to the blood volume and perform lysis at 4°C or on ice. If lysis is incomplete, a second lysis may be performed. A small amount of residual red blood cells usually does not affect the purity of subsequent cell isolation.Filter and centrifugeAfter red blood cell lysis, resuspend the cell pellet in PBS, filter through a cell strainer, and centrifuge at 400 g for 5 min.Repeat washDiscard the supernatant, add PBS, and wash once more to thoroughly remove the lysis buffer and cell debris.Adjust cell densityAfter washing, discard the supernatant and resuspend the cells in Isolation Buffer to a density of 1×10⁸ cells/mL.Note: Isolation buffer is PBS containing 2 mM EDTA and 2% fetal bovine serum (FBS). The buffer must be pre-filtered through a 0.22 μm filter.Isolation ProtocolAdd Biotin-Antibody MixAdd 100 μL of cell suspension (using 1×10⁷ cells as an example) to the bottom of a 1.5 mL centrifuge tube, then add 2 μL of Biotin-Antibody Mix. Mix thoroughly and incubate at room temperature for 10 min.Note: When adding the cell suspension, add it to the bottom of the tube, avoiding the tube wall. If isolating more cells, increase the volume of Biotin-Antibody Mix proportionally. If isolating fewer than 1×10⁷ cells, adjust the volume to 100 μL with Isolation Buffer and still use 2 μL of Biotin-Antibody Mix.Add Streptavidin Magnetic BeadsAdd 20 μL of washed Streptavidin Magnetic Beads to the centrifuge tube (the beads must be washed before use: vortex thoroughly to resuspend the beads, transfer the required volume of beads to a 1.5 mL centrifuge tube, add 1 mL of Isolation Buffer, centrifuge at 10,000 g for 1 min or use a magnetic separator for 3 min, then discard the supernatant. Add 1 mL of Isolation Buffer, wash the beads once more, and then resuspend the beads in the same volume of Isolation Buffer as originally taken. For example, if 20 μL of beads are taken, resuspend them in 20 μL of Isolation Buffer after washing). Mix thoroughly and incubate at room temperature for 10 min.Note: If isolating more cells, increase the volume of Streptavidin Magnetic Beads proportionally. For example, to isolate 5×10⁷ cells, add 10 μL of Biotin-Antibody Mix and 100 μL of Streptavidin Magnetic Beads to 500 μL of cell suspension.Transfer and diluteAfter incubation, transfer the cell and bead mixture to a FACS tube, add Isolation Buffer to a total volume of 2.5 mL, and mix thoroughly by pipetting up and down.Magnetic separationPlace the FACS tube on a magnetic separator and let stand for 5 min to allow the beads to be captured.Collect neutrophilsGently pour the cell suspension into a sterile centrifuge tube (do not remove the FACS tube from the magnetic separator while pouring, and avoid sucking up the beads). This cell suspension contains the purified human neutrophils.Resuspend for further useWash the cells as required for your experiment, then resuspend them in the desired buffer or culture medium for subsequent molecular or cell biology experiments.Isolation PerformanceNeutrophils were isolated from human peripheral blood. Cells before and after isolation were stained with Alexa Fluor 647-labeled anti-human CD66b antibody (clone 6/40c) and FITC-labeled anti-human CD16 antibody (clone 3G8) and analyzed by flow cytometry. The purity of neutrophils before and after isolation was 58.81% and 98.08%, respectively.PrecautionsAvoid freezing the magnetic beads and antibody mix during use and storage.Low-retention pipette tips and centrifuge tubes are recommended to avoid loss of beads and antibodies due to adsorption.This product must be used with a magnetic separator.For research use only.


Grade: BioReagent


Storage Temperature: Store at 2-8°C;Do not freeze


Shipped in: Wet ice;Do not freeze


Specifications
UPC:
41116126
Weight:
7.06 Ounces
HazmatClass:
No
Quantity:
1
Unit of Measurement:
ST
WeightUOM:
LB
MPN:
H1522394-100T
Country of Origin:
China
Product Size:
100T
Harmonized Tariff Code:
2931.90.90
Catalog No. C008B-270060
Price: $2,758.32
List Price: $3,064.81
  • Guaranteed quality & reliable delivery
  • Shipping Lead-Time: 14-21 Days
Adding to cart… The item has been added
Request a Quote

Enjoy exclusive benefits, including discounted pricing on bulk orders, by opening a Cenmed Business Account. Learn More.