ALADDIN SCIENTIFIC
Magnetic DNA Gel Extraction Kit
This kit is designed for the recovery of DNA fragments ranging from 100 bp to 20 KB from agarose gels of various concentrations. The method employs superparamagnetic particle purification technology and is suitable for recovering DNA from...
This kit is designed for the recovery of DNA fragments ranging from 100 bp to 20 KB from agarose gels of various concentrations. The method employs superparamagnetic particle purification technology and is suitable for recovering DNA from 100–200 mg gel slices. The extraction process eliminates the need for toxic phenol-chloroform extraction and time-consuming alcohol precipitation. The procedure is simple and convenient. The purified product can be used directly in downstream applications such as restriction enzyme digestion, ligation, PCR, quantitative real-time PCR, and sequencing. The processed products are intended for scientific research and testing purposes only.Storage ConditionsM1521707A, M1521707C, M1521707D: Store at room temperature, stable for 12 months.M1521707B: Store at 2–8°C, stable for 12 months.Compatible InstrumentsManual extraction.PrecautionsRead this manual carefully before use.Several buffers in this kit contain irritating guanidinium salts. Always wear gloves and handle according to standard safety precautions. Avoid contact of buffers with skin, eyes, and mucous membranes. In case of contact, flush immediately with plenty of water and seek medical attention.If precipitation occurs in the solution due to low ambient temperatures, incubate at 30°C in a water bath until the precipitate is completely dissolved before use.If the magnetic beads cannot be resuspended after vigorous shaking due to low ambient temperatures, do not use the beads.Several buffers in this kit contain guanidinium salts. Do not treat with oxidizing disinfectants such as sodium hypochlorite, as this may release toxic gases. Dispose of waste according to medical waste regulations.This kit components are designed to be used together as a system. Components from different lot numbers should not be interchanged or mixed.Instructions for Use1. Sample RequirementsApplicable sample type: 100–200 mg gel slice.Sample storage and transport: It is recommended that gel slices be processed immediately after excision.2. Equipment and Materials to be Supplied by UserConstant temperature water bath (for use when precipitation occurs in solutions)Dry block heaterMagnetic separation rack (for 1.5/2.0 mL tubes)1.5/2.0 mL sterile, nuclease-free centrifuge tubesPipettes and tips of various volumes (20, 200, 1000 μL)3. Reagent PreparationCheck solutions for any precipitation and confirm that the magnetic beads can be resuspended.4. Operating ProcedureRecommendation for magnetic separation (starting from step 4.4): After placing the centrifuge tube on the magnetic rack, gently rotate it left and right. Once the magnetic beads have aggregated against the tube wall closest to the magnet, gently invert the entire rack several times to collect any beads from the cap onto the tube wall. Allow to stand for several minutes until the solution becomes clear (standing time depends on the strength of the magnetic rack).4.1 Prepare an agarose gel of appropriate concentration and separate DNA fragments by electrophoresis. Once the DNA fragments are resolved, place the gel on a UV transilluminator and quickly excise the gel slice containing the target DNA fragment, removing as much excess gel as possible.4.2 Weigh the gel slice and transfer it to a 1.5 or 2.0 mL centrifuge tube. Assuming 100 mg of gel is equivalent to 100 µL in volume, add 2–4 volumes of Buffer BD. Incubate in a 50–55°C water bath for 10–15 minutes until the gel slice is completely dissolved. During incubation, vortex briefly 3 times to accelerate dissolution.4.3 Add 20 µL of Magnetic Beads MXVB and shake or vortex for 5–7 minutes to allow DNA binding to the beads.4.4 Place the tube on a 1.5 mL magnetic rack for magnetic separation until the solution is clear, then aspirate and discard the supernatant.4.5 Add 700 µL of Wash Buffer DW2. Vortex for 10 seconds to disperse the beads, then place on the magnetic rack for separation until the solution is clear. Aspirate and discard the supernatant.4.6 Add another 700 µL of Wash Buffer DW2. Vortex for 10 seconds to disperse the beads, then place on the magnetic rack for separation until the solution is clear. Aspirate and discard the supernatant.4.7 Perform a quick spin using a mini centrifuge, then place the tube back on the magnetic rack and allow beads to collect until the solution is clear. Carefully aspirate and discard all residual liquid. Open the tube cap and air-dry the beads for 3–5 minutes.Note: Residual ethanol will inhibit downstream enzymatic reactions. Ensure ethanol has completely evaporated during drying. Do not over-dry the beads, as this may affect subsequent elution efficiency.4.8 Add 30–60 µL of Elution Buffer DE and vortex at high speed for approximately 1 minute to fully disperse the beads.4.9 Incubate at 60°C with shaking for 5 minutes. If the heating block does not have a shaking function, remove the tube and vortex 2–3 times during the incubation period, 15–30 seconds each time.4.10 Briefly centrifuge to collect any droplets from the cap into the tube, then place on the magnetic rack until the solution is clear.4.11 Transfer the DNA solution to a new centrifuge tube for subsequent use. If not used immediately, store at -15 to -25°C. For long-term storage, place at -70°C or lower.Limitations of the MethodFor certain poorly collected samples, trace impurities in the extracted product may inhibit PCR amplification.The efficiency of nucleic acid extraction is closely related to the quality of sample collection, handling, transport, and storage. Any error in these processes may lead to inaccurate results.
Specifications & Purity: This kit is designed for the recovery of DNA fragments ranging from 100 bp to 20 KB from agarose gels of various concentrations. The method employs superparamagnetic particle purification technology and is suitable for recovering DNA from 100–200 mg gel slices. The extraction process eliminates the need for toxic phenol-chloroform extraction and time-consuming alcohol precipitation. The procedure is simple and convenient. The purified product can be used directly in downstream applications such as restriction enzyme digestion, ligation, PCR, quantitative real-time PCR, and sequencing. The processed products are intended for scientific research and testing purposes only.Storage ConditionsM1521707A, M1521707C, M1521707D: Store at room temperature, stable for 12 months.M1521707B: Store at 2–8°C, stable for 12 months.Compatible InstrumentsManual extraction.PrecautionsRead this manual carefully before use.Several buffers in this kit contain irritating guanidinium salts. Always wear gloves and handle according to standard safety precautions. Avoid contact of buffers with skin, eyes, and mucous membranes. In case of contact, flush immediately with plenty of water and seek medical attention.If precipitation occurs in the solution due to low ambient temperatures, incubate at 30°C in a water bath until the precipitate is completely dissolved before use.If the magnetic beads cannot be resuspended after vigorous shaking due to low ambient temperatures, do not use the beads.Several buffers in this kit contain guanidinium salts. Do not treat with oxidizing disinfectants such as sodium hypochlorite, as this may release toxic gases. Dispose of waste according to medical waste regulations.This kit components are designed to be used together as a system. Components from different lot numbers should not be interchanged or mixed.Instructions for Use1. Sample RequirementsApplicable sample type: 100–200 mg gel slice.Sample storage and transport: It is recommended that gel slices be processed immediately after excision.2. Equipment and Materials to be Supplied by UserConstant temperature water bath (for use when precipitation occurs in solutions)Dry block heaterMagnetic separation rack (for 1.5/2.0 mL tubes)1.5/2.0 mL sterile, nuclease-free centrifuge tubesPipettes and tips of various volumes (20, 200, 1000 μL)3. Reagent PreparationCheck solutions for any precipitation and confirm that the magnetic beads can be resuspended.4. Operating ProcedureRecommendation for magnetic separation (starting from step 4.4): After placing the centrifuge tube on the magnetic rack, gently rotate it left and right. Once the magnetic beads have aggregated against the tube wall closest to the magnet, gently invert the entire rack several times to collect any beads from the cap onto the tube wall. Allow to stand for several minutes until the solution becomes clear (standing time depends on the strength of the magnetic rack).4.1 Prepare an agarose gel of appropriate concentration and separate DNA fragments by electrophoresis. Once the DNA fragments are resolved, place the gel on a UV transilluminator and quickly excise the gel slice containing the target DNA fragment, removing as much excess gel as possible.4.2 Weigh the gel slice and transfer it to a 1.5 or 2.0 mL centrifuge tube. Assuming 100 mg of gel is equivalent to 100 µL in volume, add 2–4 volumes of Buffer BD. Incubate in a 50–55°C water bath for 10–15 minutes until the gel slice is completely dissolved. During incubation, vortex briefly 3 times to accelerate dissolution.4.3 Add 20 µL of Magnetic Beads MXVB and shake or vortex for 5–7 minutes to allow DNA binding to the beads.4.4 Place the tube on a 1.5 mL magnetic rack for magnetic separation until the solution is clear, then aspirate and discard the supernatant.4.5 Add 700 µL of Wash Buffer DW2. Vortex for 10 seconds to disperse the beads, then place on the magnetic rack for separation until the solution is clear. Aspirate and discard the supernatant.4.6 Add another 700 µL of Wash Buffer DW2. Vortex for 10 seconds to disperse the beads, then place on the magnetic rack for separation until the solution is clear. Aspirate and discard the supernatant.4.7 Perform a quick spin using a mini centrifuge, then place the tube back on the magnetic rack and allow beads to collect until the solution is clear. Carefully aspirate and discard all residual liquid. Open the tube cap and air-dry the beads for 3–5 minutes.Note: Residual ethanol will inhibit downstream enzymatic reactions. Ensure ethanol has completely evaporated during drying. Do not over-dry the beads, as this may affect subsequent elution efficiency.4.8 Add 30–60 µL of Elution Buffer DE and vortex at high speed for approximately 1 minute to fully disperse the beads.4.9 Incubate at 60°C with shaking for 5 minutes. If the heating block does not have a shaking function, remove the tube and vortex 2–3 times during the incubation period, 15–30 seconds each time.4.10 Briefly centrifuge to collect any droplets from the cap into the tube, then place on the magnetic rack until the solution is clear.4.11 Transfer the DNA solution to a new centrifuge tube for subsequent use. If not used immediately, store at -15 to -25°C. For long-term storage, place at -70°C or lower.Limitations of the MethodFor certain poorly collected samples, trace impurities in the extracted product may inhibit PCR amplification.The efficiency of nucleic acid extraction is closely related to the quality of sample collection, handling, transport, and storage. Any error in these processes may lead to inaccurate results.
Grade: BioReagent;Suitable for molecular biology;for DNA and RNA applications
Storage Temperature: Store at 2-8°C;Room temperature
Shipped in: Wet ice
- UPC:
- 42294303
- Weight:
- 7.06 Ounces
- HazmatClass:
- No
- Quantity:
- 1
- Unit of Measurement:
- ST
- WeightUOM:
- LB
- MPN:
- M1521707-48T
- Country of Origin:
- China
- Product Size:
- 48T
- Harmonized Tariff Code:
- 2931.90.90



