MVP ICON® Surface Sampling Device

General description

The MVP ICON^® Surface Sampling Device is a self-contained device for use with the MVP ICON^® system for quality and HACCP-related monitoring of the environment. The sampling device does not puncture seals during activation, but lets the reagent flow down the swab shaft, and uniformly releases ATP sample from the tip. The MVP ICON^® Surface Sampling Device is designed to compensate for variations in swabbing technique, thus offering accurate and consistent readings every time.
The MVP ICON^® system detects food and microbiological residues by measuring Adenosine triphosphate (ATP) using luciferase bioluminescence. ATP is found in most food residues and all bacteria, yeast, and mold cells.

Application

ATP Bioluminescence

ATP Testing, Food Processing, HACCP Monitoring, Sanitation

MVP ICON^® Surface Sampling Device is used with the MVP ICON^® system to detect food and microbiological residues during hygiene monitoring for the Food and Beverage industries.

Biochem/physiol Actions

The detection of ATP through bioluminescence is a well-established and widely used indicator of surface hygiene and cleaning efficacy in food processing. Visual inspection is not an adequate critical control for surface hygiene and the lengthy time-to-result of microbiological test methods (from 2 - 7 days) make them ineffective for hygiene monitoring. ATP detection with the MVP ICON provides results in 10 seconds allowing for immediate "go/no-go" decisions to be made prior to the start of processing and allows for correction actions, when necessary, to be taken immediately. ATP is a molecule that is found in all living cells, including: bacteria, yeast, mold and all organic matter. After cleaning and/or sanitizing, food processing equipment and the plant environment is tested for ATP. If cleaning/sanitizing has been effective, ATP levels should be low.

Features and Benefits

Increase Confidence in Your Results

• Superior swab design eliminates variation in operator‚Ä≤s collection technique, increasing reproducibility and providing assurance swab will be accurately and consistently measured each time.
• Light output of the reagent is measured, not the solid device surface, ensuring a high degree of repeatability.
• Reagent flows through hollow sampling device shaft to evenly wash ATP off sampling tip into bottom of the collection tube, ensuring a high degree of accuracy.
• Sampling devices feature one-hand, one-step activation freeing one hand for other operations.

• The swab‚Ä≤s proprietary neutralizing buffer minimizes potential sanitizer interference so measurements can be taken before OR after sanitizing, letting you decide when it is most convenient to conduct your testing.
• Minimizes potential effect of commonly used sanitizers such as: Quat, Chlorine, and Peracetic Acid.
• Reduces false negative and false positive results caused by the quenching or amplification of sanitizers on competing swabs.

• Store sampling devices at room temperature ‚Äì no refrigeration needed; saving precious refrigeration space for other necessities.

Preparation Note

Store at 2 to 30 °C (Protect from direct sunlight. Unused devices must be resealed in the foil bags.)

Other Notes

All test reagents are contained within the sampling device.

Legal Information

MVP ICON is a registered trademark of Merck KGaA, Darmstadt, Germany

UPC:

42181515

Weight:

1.00 Ounces

HazmatClass:

No

Quantity:

100

Unit of Measurement:

UN

WeightUOM:

LB

MPN:

64003