Skip to main content
Exclusive Savings: Take 10% OFF All Cenmed Products | Upgrade Your Lab For Less Shop Now
US English

ALADDIN SCIENTIFIC

Peroxidase (POD) Activity Assay Kit (Colorimetric Method)

Peroxidase (POD, EC 1.11.

Description

Peroxidase (POD, EC 1.11.1.7) widely exists in animals, plants, microorganisms and cultured cells. It catalyzes the oxidation of phenolic and amine compounds by hydrogen peroxide, and plays a dual role in eliminating the toxicity of hydrogen peroxide, phenols and amines.Determination Principle:POD catalyzes hydrogen peroxide to oxidate specific substrates, which shows characteristic light absorption at 470 nm.Note:This kit is only for scientific research, not for clinical diagnosis or other applications.It is necessary to conduct preliminary tests with 2 to 3 samples with significant expected differences before formal detection.Components and Storage:Item No.AppearanceComponents50TStorageP1521767ALiquidExtract Solution60 mL2-8℃.P1521767BLiquidReagent 150 mL2-8℃.P1521767CLiquidReagent 2100 μl2-8℃.P1521767DLiquidReagent 3100 μl2-8℃.Self-prepared Instruments and Reagents:⁕Spectrophotometer (capable of absorbance measurement at 470 nm)⁕Visible spectrophotometer, bench-top centrifuge, adjustable pipette, 1 mL glass cuvette, mortar⁕Ice and distilled waterCrude Enzyme Extraction:1. Preparation of bacterial, cellular and tissue samplesBacteria or cultured cells: Collect bacteria or cells into centrifuge tubes and discard the supernatant after centrifugation. Mix extraction solution at the ratio of 500~1000 : 1 (10⁴ cells per mL extraction solution); it is recommended to add 1 mL extraction solution for 5 million bacteria or cells. Lyse samples by ultrasonication under ice bath with power of 20% or 200 W, 3-second ultrasonication with 10-second interval, repeat 30 times. Centrifuge at 8000 g and 4 ℃ for 10 minutes, take the supernatant and keep it on ice for test.Tissues: Homogenize tissues under ice bath at the mass-to-volume ratio of 1 g tissue to 5~10 mL extraction solution; it is recommended to add 1 mL extraction solution to approximately 0.1 g tissue. Centrifuge at 8000 g and 4 ℃ for 10 minutes, take the supernatant and keep it on ice for test.2. Serum or plasma samples: Direct detectionDetection Procedures:1. Preheat the spectrophotometer for no less than 30 minutes, set the wavelength to 470 nm and calibrate zero with distilled water.2. Working solution preparation: Mix Reagent 1, Reagent 2 and Reagent 3 at the volume ratio of 2.6 mL : 1.5 μL : 1 μL before use. Preheat the mixture for over 10 minutes at 37 ℃ for mammalian samples or 25 ℃ for other species. Prepare freshly before use.3. Add 50 μL sample and 950 μL working solution into a 1 mL glass cuvette and mix thoroughly. Record absorbance A1 at 1 minute and A2 at 2 minutes at 470 nm. Calculate ΔA=A2-A1.Precautions:Extend reaction time to 5 minutes if ΔA is lower than 0.005. Dilute samples with extraction solution for retest if ΔA exceeds 0.5, and multiply the corresponding dilution factor in calculation.Calculation of POD Activity:1. POD activity in serum/plasmaUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per milliliter serum/plasma in 1 mL reaction system.Calculation formula:POD (U/mL) = ΔA × Vtotal reaction ÷ Vsample ÷ 0.01 ÷ T = 2000 × ΔA2. POD activity in tissue, bacteria or cells(1) Calculated by sample protein concentrationUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per milligram tissue protein in 1 mL reaction system.POD (U/mg prot) = ΔA × Vtotal reaction ÷ (Vsample × Cpr) ÷ 0.01 ÷ T = 2000 × ΔA ÷ Cpr2) Calculated by fresh sample weightUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per gram fresh tissue in 1 mL reaction system.POD (U/g fresh weight) = ΔA × Vtotal reaction ÷ (W × Vsample ÷ Vtotal sample) ÷ 0.01 ÷ T = 2000 × ΔA ÷ W(3) Calculated by bacterial or cellular densityUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per ten thousand bacteria or cells in 1 mL reaction system.POD (U/10⁴ cell) = ΔA × Vtotal reaction ÷ (500 × Vsample ÷ Vtotal sample) ÷ 0.01 ÷ T = 4 × ΔA Vtotal reaction: Total volume of reaction system, 1 mL Vsample: Volume of added sample, 0.05 mL Vtotal sample: Volume of extraction solution added, 1 mLT: Reaction time, 1 minCpr: Sample protein concentration, mg/mLW: Weight of sampleTotal number of bacteria or cells: 5 million


Specifications & Purity: Peroxidase (POD, EC 1.11.1.7) widely exists in animals, plants, microorganisms and cultured cells. It catalyzes the oxidation of phenolic and amine compounds by hydrogen peroxide, and plays a dual role in eliminating the toxicity of hydrogen peroxide, phenols and amines.Determination Principle:POD catalyzes hydrogen peroxide to oxidate specific substrates, which shows characteristic light absorption at 470 nm.Note:This kit is only for scientific research, not for clinical diagnosis or other applications.It is necessary to conduct preliminary tests with 2 to 3 samples with significant expected differences before formal detection.Components and Storage:Item No.AppearanceComponents50TStorageP1521767ALiquidExtract Solution60 mL2-8℃.P1521767BLiquidReagent 150 mL2-8℃.P1521767CLiquidReagent 2100 μl2-8℃.P1521767DLiquidReagent 3100 μl2-8℃.Self-prepared Instruments and Reagents:⁕Spectrophotometer (capable of absorbance measurement at 470 nm)⁕Visible spectrophotometer, bench-top centrifuge, adjustable pipette, 1 mL glass cuvette, mortar⁕Ice and distilled waterCrude Enzyme Extraction:1. Preparation of bacterial, cellular and tissue samplesBacteria or cultured cells: Collect bacteria or cells into centrifuge tubes and discard the supernatant after centrifugation. Mix extraction solution at the ratio of 500~1000 : 1 (10⁴ cells per mL extraction solution); it is recommended to add 1 mL extraction solution for 5 million bacteria or cells. Lyse samples by ultrasonication under ice bath with power of 20% or 200 W, 3-second ultrasonication with 10-second interval, repeat 30 times. Centrifuge at 8000 g and 4 ℃ for 10 minutes, take the supernatant and keep it on ice for test.Tissues: Homogenize tissues under ice bath at the mass-to-volume ratio of 1 g tissue to 5~10 mL extraction solution; it is recommended to add 1 mL extraction solution to approximately 0.1 g tissue. Centrifuge at 8000 g and 4 ℃ for 10 minutes, take the supernatant and keep it on ice for test.2. Serum or plasma samples: Direct detectionDetection Procedures:1. Preheat the spectrophotometer for no less than 30 minutes, set the wavelength to 470 nm and calibrate zero with distilled water.2. Working solution preparation: Mix Reagent 1, Reagent 2 and Reagent 3 at the volume ratio of 2.6 mL : 1.5 μL : 1 μL before use. Preheat the mixture for over 10 minutes at 37 ℃ for mammalian samples or 25 ℃ for other species. Prepare freshly before use.3. Add 50 μL sample and 950 μL working solution into a 1 mL glass cuvette and mix thoroughly. Record absorbance A1 at 1 minute and A2 at 2 minutes at 470 nm. Calculate ΔA=A2-A1.Precautions:Extend reaction time to 5 minutes if ΔA is lower than 0.005. Dilute samples with extraction solution for retest if ΔA exceeds 0.5, and multiply the corresponding dilution factor in calculation.Calculation of POD Activity:1. POD activity in serum/plasmaUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per milliliter serum/plasma in 1 mL reaction system.Calculation formula:POD (U/mL) = ΔA × Vtotal reaction ÷ Vsample ÷ 0.01 ÷ T = 2000 × ΔA2. POD activity in tissue, bacteria or cells(1) Calculated by sample protein concentrationUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per milligram tissue protein in 1 mL reaction system.POD (U/mg prot) = ΔA × Vtotal reaction ÷ (Vsample × Cpr) ÷ 0.01 ÷ T = 2000 × ΔA ÷ Cpr2) Calculated by fresh sample weightUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per gram fresh tissue in 1 mL reaction system.POD (U/g fresh weight) = ΔA × Vtotal reaction ÷ (W × Vsample ÷ Vtotal sample) ÷ 0.01 ÷ T = 2000 × ΔA ÷ W(3) Calculated by bacterial or cellular densityUnit definition: One unit of enzyme activity is defined as the absorbance change of 0.01 at 470 nm per minute per ten thousand bacteria or cells in 1 mL reaction system.POD (U/10⁴ cell) = ΔA × Vtotal reaction ÷ (500 × Vsample ÷ Vtotal sample) ÷ 0.01 ÷ T = 4 × ΔA Vtotal reaction: Total volume of reaction system, 1 mL Vsample: Volume of added sample, 0.05 mL Vtotal sample: Volume of extraction solution added, 1 mLT: Reaction time, 1 minCpr: Sample protein concentration, mg/mLW: Weight of sampleTotal number of bacteria or cells: 5 million


Grade: BioReagent


Storage Temperature: Store at 2-8°C


Shipped in: Wet ice


Specifications
UPC:
51472903
Weight:
1.09 Ounces
HazmatClass:
No
Quantity:
1
Unit of Measurement:
ST
WeightUOM:
LB
MPN:
P1521767-50T
Country of Origin:
China
Product Size:
50T
Harmonized Tariff Code:
2931.90.90
Catalog No. C008B-265990
Price: $103.67
List Price: $115.19
  • Guaranteed quality & reliable delivery
  • Shipping Lead-Time: 5-10 Days
Adding to cart… The item has been added
Request a Quote

Enjoy exclusive benefits, including discounted pricing on bulk orders, by opening a Cenmed Business Account. Learn More.