ALADDIN SCIENTIFIC
Plant Proanthocyanidin (OPC) Content Detection Kit (Colorimetric Method)
Proanthocyanidins (Oligomeric Proanthocyanidins, OPC) are a group of polyphenolic compounds composed of flavanol monomers and their polymers. They are widely distributed in various plant organs and exhibit strong antioxidant activity and free...
Proanthocyanidins (Oligomeric Proanthocyanidins, OPC) are a group of polyphenolic compounds composed of flavanol monomers and their polymers. They are widely distributed in various plant organs and exhibit strong antioxidant activity and free radical scavenging effects. Accordingly, they are extensively applied in the pharmaceutical, food, cosmetic and health product industries.Determination Principle:Under acidic conditions, resorcinol and phloroglucinol on the A-ring of plant proanthocyanidins undergo a condensation reaction with vanillin to form colored compounds, which have a characteristic absorption peak at 500 nm. The proanthocyanidin content can be calculated by measuring the absorbance at 500 nm. It is necessary to conduct a pre-experiment with 2–3 samples of expected significant differences before formal detection.Note: This kit is only for scientific research purposes and shall not be used for clinical diagnosis or other applications.Item No.AppearanceComponents50TStorage-LiquidExtraction Buffer: 60% Ethanol (self-supplied)50 mL2-8℃.-LiquidReagent 1: 8% Hydrochloric Acid (self-supplied)20 mL2-8℃.P1521900ASolidReagent 2: Powder1 EA2-8℃. Store in the dark.Extraction Solution: 60% ethanol, self-prepared (Dissolve 30 mL absolute ethanol in 20 mL distilled water plus 100 μL hydrochloric acid). Store at 4 °C.Reagent Ⅰ: 8% hydrochloric acid, self-prepared (Dissolve 1.6 mL hydrochloric acid in 18.4 mL methanol). Store at 4 °C.Reagent Ⅱ: Powder, 0.125 g per bottle. Store at 4 °C away from light; dissolve with 12.5 mL methanol before use.Working Assay Solution: Mix Reagent Ⅰ and Reagent Ⅱ at a volume ratio of 1:1 according to required dosage before use.Blank Working Solution: Mix Reagent Ⅰ and methanol at a volume ratio of 1:1 according to required dosage before use.Reagents, consumables and Equipments not provided⁕Spectrophotometer (measurable at 500 nm)⁕Electronic balance, room-temperature centrifuge, visible spectrophotometer, 1 mL glass cuvettes⁕Distilled water, hydrochloric acid, absolute ethanol and methanolOPC Extraction:Weigh approximately 0.1 g of sample, add 2 mL extraction buffer. After homogenization, perform shaking extraction at 60 °C for 2 h. Centrifuge at 10000 g and 25 °C for 10 min, then collect the supernatant for subsequent determination.Assay Protocol Table/Control TubeAssay TubeSample (μL)200200Working Solution (μL)/800Blank Working Solution (μL)800/Mix thoroughly, then incubate in a water bath at 30 ℃ for 30 min. Use 1 mL glass cuvettes, set zero with distilled water at 500 nm, and measure the absorbance of each tube. Calculate the absorbance difference: ΔA = AAssay – AControl. One control tube shall be set for each assay tube.OPC Calculation Formula:Standard curve equation: y=0.0194x+0.0006,R²=0.999OPC content (mg/g fresh weight) = (ΔA-0.0006) ÷0.0194×Vtotal reaction÷(Vsample÷Vtotal sample×W)×10⁻³= 0.515×(ΔA-0.0006 ) ÷ WVtotal sample: Volume of added extract, 2 mLVtotal reaction: Total reaction volume, 1 mLVsample: Sample volume in reaction system, 0.2 mLW: Sample weight, gPrecautions:1. The prepared Reagent 2 should be used promptly. The storage period at 4 ℃ shall not exceed one month.2. The absorbance value should be controlled within the range of 0.05–0.8. If out of range, increase the sample dosage or dilute the sample correspondingly, and adjust the dilution factor in the calculation formula.3. The limit of detection (LOD) is 10 μg/g.
Specifications & Purity: Proanthocyanidins (Oligomeric Proanthocyanidins, OPC) are a group of polyphenolic compounds composed of flavanol monomers and their polymers. They are widely distributed in various plant organs and exhibit strong antioxidant activity and free radical scavenging effects. Accordingly, they are extensively applied in the pharmaceutical, food, cosmetic and health product industries.Determination Principle:Under acidic conditions, resorcinol and phloroglucinol on the A-ring of plant proanthocyanidins undergo a condensation reaction with vanillin to form colored compounds, which have a characteristic absorption peak at 500 nm. The proanthocyanidin content can be calculated by measuring the absorbance at 500 nm. It is necessary to conduct a pre-experiment with 2–3 samples of expected significant differences before formal detection.Note: This kit is only for scientific research purposes and shall not be used for clinical diagnosis or other applications.Item No.AppearanceComponents50TStorage-LiquidExtraction Buffer: 60% Ethanol (self-supplied)50 mL2-8℃.-LiquidReagent 1: 8% Hydrochloric Acid (self-supplied)20 mL2-8℃.P1521900ASolidReagent 2: Powder1 EA2-8℃. Store in the dark.Extraction Solution: 60% ethanol, self-prepared (Dissolve 30 mL absolute ethanol in 20 mL distilled water plus 100 μL hydrochloric acid). Store at 4 °C.Reagent Ⅰ: 8% hydrochloric acid, self-prepared (Dissolve 1.6 mL hydrochloric acid in 18.4 mL methanol). Store at 4 °C.Reagent Ⅱ: Powder, 0.125 g per bottle. Store at 4 °C away from light; dissolve with 12.5 mL methanol before use.Working Assay Solution: Mix Reagent Ⅰ and Reagent Ⅱ at a volume ratio of 1:1 according to required dosage before use.Blank Working Solution: Mix Reagent Ⅰ and methanol at a volume ratio of 1:1 according to required dosage before use.Reagents, consumables and Equipments not provided⁕Spectrophotometer (measurable at 500 nm)⁕Electronic balance, room-temperature centrifuge, visible spectrophotometer, 1 mL glass cuvettes⁕Distilled water, hydrochloric acid, absolute ethanol and methanolOPC Extraction:Weigh approximately 0.1 g of sample, add 2 mL extraction buffer. After homogenization, perform shaking extraction at 60 °C for 2 h. Centrifuge at 10000 g and 25 °C for 10 min, then collect the supernatant for subsequent determination.Assay Protocol Table/Control TubeAssay TubeSample (μL)200200Working Solution (μL)/800Blank Working Solution (μL)800/Mix thoroughly, then incubate in a water bath at 30 ℃ for 30 min. Use 1 mL glass cuvettes, set zero with distilled water at 500 nm, and measure the absorbance of each tube. Calculate the absorbance difference: ΔA = AAssay – AControl. One control tube shall be set for each assay tube.OPC Calculation Formula:Standard curve equation: y=0.0194x+0.0006,R²=0.999OPC content (mg/g fresh weight) = (ΔA-0.0006) ÷0.0194×Vtotal reaction÷(Vsample÷Vtotal sample×W)×10⁻³= 0.515×(ΔA-0.0006 ) ÷ WVtotal sample: Volume of added extract, 2 mLVtotal reaction: Total reaction volume, 1 mLVsample: Sample volume in reaction system, 0.2 mLW: Sample weight, gPrecautions:1. The prepared Reagent 2 should be used promptly. The storage period at 4 ℃ shall not exceed one month.2. The absorbance value should be controlled within the range of 0.05–0.8. If out of range, increase the sample dosage or dilute the sample correspondingly, and adjust the dilution factor in the calculation formula.3. The limit of detection (LOD) is 10 μg/g.
Grade: BioReagent
Storage Temperature: Store at 2-8°C;Protected from light
Shipped in: Wet ice
- UPC:
- 51441578
- Weight:
- 1.09 Ounces
- HazmatClass:
- No
- Quantity:
- 1
- Unit of Measurement:
- ST
- WeightUOM:
- LB
- MPN:
- P1521900-50T
- Country of Origin:
- China
- Product Size:
- 50T
- Harmonized Tariff Code:
- 2931.90.90



