Single CellTrol,pH/DO/Temp 2 Pumps

The CellTrol II can be configured to accept a variety of analog probe signals from a cell culture vessel. Standard signals include pH, dissolved oxygen, temperature, weight, redox, and tachometer feedback from the agitator. A digital input signal from a level probe can be used for anti-foam addition for level control. The CellTrol II control module monitors bioreactor process valves and performs PLC ( Allen-Bradley Programmable Logic Controller) based process control. A touch screen operator interface provides access to all based PLC control functions and allows viewing and modification of control parameters. PLC control drives the inc/dec outlets assigned to each channel as well as to pumps mounted on the front of the unit. The pump assignments are user defined from the operator interface. Cell-Soft Software are also available, optional tethered speed drive, optional single support flow station and weight platforms are sold separately. Specifications : Dimensions: 20.5¢‚¬‚H X 13¢‚¬‚W X 24¢‚¬‚D (51 X 33 X 61cm) Material: Stainless Steel Line Power: 115v Ac @ 15amp 50/60hz, Consumption: Up To 12 Amps Depending Upon Configuration. Operator Interface: 6€ Color Touch Screen. Input Types: RTD, pH Probe, Do Probe, Foam/Level (Digital Input) Heater Blanket: 2 @ 600w.(Maximum 600w €“ Do Not Exceed) Control Inputs: 8 Outlets, 120vac Inc/Dec Outlets (2 Per Channel) Two Through Six User-Assigned Pumps Depending Upon Configuration 1rpm, 4rpm, Or 10rpm (Customer Specified). Alarms: Operator Programmable. Communications: TCI/IP Protocol Standard.

UPC:

41115600

Condition:

New

Weight:

1.00 Ounces

HazmatClass:

No

Quantity:

1

Unit of Measurement:

EA

WeightUOM:

LB

MPN:

7804-11002