WaterPro BT Water Purification System, w/remote dispenser, 115V

The WaterPro BT System produces both RO-purified and Type 1 water packaged in a compact all-in-one benchtop design.

Specifications
All Models Feature:
• Thermoplastic housing with removable thermoplastic cover
• Dispensing valve that dispense > 0.5 liter per minute Type I water by pressing the dispense button
• 6 liter capacity RO-purified water storage tank
• Feedwater inlet tubing, 7 ft. long, with 1/2 in. OD Male NPTM, BSPM or GAZ fitting and pre-filter screen
• RO reject tubing, 80 in. long
• 50 dB maximum noise level at a distance of 3-1/4 feet (1 m)
• Distribution pump
• Continuous/intermittent recirculation
• Color LCD for display of operating modes, operating parameters, maintenance or alarm messages and tank level. Alarms includes filter cartridge change after set time has expired or amount of water has been reached, resistively less than setpoint, incorrect filter installation, and water detected in tank while in Flush mode.
• Keypad for accessing display settings, function settings, and calibrations
• One year warranty
• Power cord and plug
• Miscellaneous accessories: 10 ft. (3 m) clear tubing and 3/8 in. ID hose barb for the Type I dispensing valve; 8 x 8 mm elbow connector and 3 ft. (1 m) of 8 mm tubing with ball valve for the tank outlet; and two each 1 micron Air Vent Filters
• UL listing
• CE Conformity marking
• Overall dimensions: 11.4 w x 16.6 d x 21.2 h in. (29.0 x 42.2 x 53.8 cm)

UV Models also Features:
• UV Lamp, 185 and 254 nanometers

Remote Dispenser Models also Feature:
• Remote Dispenser with 6.5 ft. (2m) tether
• White powder-coated steel dispenser stand, 14.0 w x 8.0 d x 23.0 h in. (35.6 x 20.3 x 58.4 cm). Overall height with remote dispenser: 25 in. (63.5 cm)

All models Require:
• WaterPro BT Filter Pack, p/n 9019200
Image(s) are representative of the product group and not necessarily the individual product.